Online ordering opens very soon. We're just finishing our DVLA registration. Design your plates now and get in touch to be first in the queue. Register your interest
Home / How it works

How it works.

Four simple steps. Design your plates in a minute, upload your documents at checkout and we do the rest.

Design and order

Four steps to your plates

01

Type your reg

Pop in your registration number. Your plates appear instantly in the live preview.

02

Choose plates and size

Pick a matching pair or just a front or rear plate. Then choose a standard car plate, a 4x4 square plate or a motorbike plate.

03

Pick your style

Choose printed, 3D gel, 4D or 5D. Add a border and a side badge if you fancy. Every change shows on your plates straight away.

04

Add extras and buy

Add a fixing kit or express production, check your summary, upload photos of your ID and V5C (or certificate) and pay securely by card, Apple Pay, Google Pay or PayPal.

After you order

What happens next

No chasing and no surprises. Here is what happens once you hit buy.

Order confirmed and checked

You get an email straight away with your order summary. We then check your documents, usually the same working day, and email you once they are verified.

Made to order

We make your plates to your exact design, including your spacing, style, border and badge.

Sent tracked

Plates are usually dispatched within 1 to 2 working days, or the next working day with express production.

Fit and enjoy

Your plates arrive well packed and ready to fit. Add a fixing kit and you will have everything you need.

Road legal

Checked properly, made properly

We are a DVLA registered number plate supplier, so by law we check your ID and your right to the registration before we make any plates. You upload photos at checkout and we usually check them the same working day. What documents do I need?

Fitting with sticky pads

  1. Clean and dry the area where your plate will go.
  2. Stick the pads evenly across the back of the plate.
  3. Line it up, press firmly and hold for 30 seconds.
  4. Leave it to bond for a few hours before washing.

Fitting with screws

  1. Hold the plate in place and mark the existing holes.
  2. Carefully drill small holes through the plate.
  3. Screw the plate on firmly without over-tightening.
  4. Pop the screw caps on for a neat finish.

Ready when you are

Four simple steps and your road legal plates are on their way.

Build your plates
Made by The Simple Website Company, partner of Verve Digital